Commercial Roofing
Commercial Roofing
Repair, maintenance, coatings, storm documentation, and replacement planning should begin with what the roof is actually showing.
The goal is to keep each roof choice tied to condition, access, weather, occupancy, and the decision the owner needs to make next.
Commercial Roof Leak Repair
Tracing a leak on a Boise low-slope roof means following water from the interior stain back to the real entry point, since a wet ceiling often sits far from the failed seam, flashing, or penetration.
Storm Damage Roof Repair
When wind, hail, or heavy snow hit a Boise roof, we separate emergency water control from the documented repair scope, so the building is protected now and the larger claim is built on evidence.
Roof Tear-Off and Replacement
A full tear-off and replacement is the right call once a Boise roof is saturated or past its life, and we plan disposal, deck repair, insulation upgrades, and tenant protection as one coordinated job.
Commercial Re-Roofing
Re-roofing a Boise commercial building is a capital decision, so we document the existing assembly, moisture survey results, and code-required insulation before recommending recover versus full tear-off.
Occupied Building Re-Roofing
Re-roofing an occupied Boise building is as much logistics as roofing, so we sequence sections, control debris and odor, and protect tenants and rooftop equipment while the work moves across the deck.
Hail Damage Roof Restoration
After a Treasure Valley hailstorm, we map bruising, fractured granules, and split membrane across the roof and translate the damage into a repair-or-replace scope that holds up to an insurance adjuster.
Silicone Roof Restoration
Silicone coatings shed ponded water and resist Boise's UV better than most field-applied systems, making them a strong restoration choice for sound roofs that pool but aren't ready to replace.
Insulation and Recovery Board
The right insulation and recovery board sets a Boise roof's R-value and gives the membrane a sound, even base; we match thickness to code and tapered layouts to drainage when re-roofing.
Roof Recover and Overlay
When the existing assembly is dry and code allows, a recover overlay adds a new membrane without a full tear-off, and we run a moisture survey first so a Boise roof isn't sealed over hidden saturation.
Preventive Maintenance Programs
A scheduled maintenance contract gives a Boise property owner predictable roof care, with documented inspections each spring and fall that catch freeze-thaw cracking and clogged drains before they leak.
Commercial Roof Preventive Maintenance Program
A documented maintenance program keeps small problems on Boise commercial roofs from becoming claims, with scheduled drain clearing, seam checks, and flashing touch-ups timed around the valley's freeze-thaw season.
Acrylic Roof Coatings
When a sound but weathering low-slope roof needs more life without a tear-off, acrylic coatings reflect Boise's intense summer sun and seal aging seams; we confirm the substrate is dry and adherable first.
Commercial Roof Coatings
A field-applied coating can buy a Boise roof years of added service and lower cooling loads, but only on the right substrate; we test adhesion and mil thickness rather than coating over failing membrane.
Drone Roof Inspection & Thermal Imaging
Drone imaging and thermal scans let us survey large or steep Boise roofs safely, flagging trapped moisture and membrane defects from above before anyone sets foot on a fragile surface.
Roof Inspection and Condition Report
A condition report turns a Boise roof into a usable record, documenting membrane, flashings, drainage, and remaining life so an owner can budget repairs instead of reacting to the next leak.
Emergency Tarp Dry In
After storm damage or a sudden failure, a fast tarp-and-dry-in stops water from reaching inventory and tenants while a Boise building owner plans the permanent repair on a clear head.
Roof Drains and Scuppers
Drains and scuppers decide whether a Boise low-slope roof sheds a fast summer downpour or ponds water that freezes and works under the membrane; we clear, reseal, and re-slope to keep them flowing.
University and College Campus Roofing
Campus roofs span many buildings and roof types, so we help Boise-area institutions inventory conditions, prioritize by risk, and schedule replacements around academic calendars and tight capital budgets.
TPO Single-Ply Roofing
TPO's reflective white surface and welded seams suit Boise's sunny summers and large flat roofs, and we weld and probe every seam so the membrane reflects heat without leaking at the laps.
Edge Metal, Coping, and Gutters
Edge metal, coping, and gutters take the brunt of the downslope wind that rakes Boise's Bench and foothills, so we check fastening, hem strength, and water management at every roof perimeter.
Metal R-Panel Roofing
Exposed-fastener R-panel roofs are common on Boise warehouses and ag buildings, and we inspect fastener backing-out, panel oil-canning, and seam sealant before wind and snow find the weak points.
Government and Municipal Building Roofing
Roofs over Boise civic buildings, courthouses, and municipal facilities have to meet public-budget scrutiny and stay open to the public, so we document conditions thoroughly to support funding and phased work.
Modified Bitumen Roofing
Modified-bitumen systems give Boise low-slope roofs a tough, multi-ply surface, and we check granule loss, seam adhesion, and flashing laps to judge whether to maintain, coat, or replace.
Spray Foam Roofing
Spray polyurethane foam seals and insulates a Boise low-slope roof in one monolithic pass, filling odd shapes and improving R-value, but it lives and dies by a maintained protective coating against UV.
Solar Roof Integration for Commercial Buildings
Mounting solar on a Boise commercial roof only makes sense on a membrane with years left, so we coordinate attachment, flashing, and warranty so the array never becomes the source of a leak.
Manufacturing Facility Roofing
Roofs over Boise-area manufacturing plants must handle process heat, rooftop equipment, and the high cost of downtime, so our scopes prioritize drainage, durable flashings, and work that respects the production schedule.
Mixed-Use Development Roofing
Mixed-use buildings stack retail, office, and residential under one roof in Boise, so leak response and replacement planning have to account for several tenant types, varied schedules, and limited staging space.
Hotel and Hospitality Property Roofing
Hotel roofs in Boise sit above guests day and night, so we phase repairs and replacements to control noise, protect rooftop HVAC and kitchen exhaust, and keep rooms occupied through the work.
Office Building Roofing
Office roofs in Boise carry rooftop HVAC and quiet expectations from the tenants below, so we schedule loud work thoughtfully and keep drainage and curb flashing tight to prevent ceiling stains.
Skylight and Penetration Flashing
Skylights, vents, and pipe penetrations are the usual leak points on a Boise commercial roof, so we rebuild curbs and flashings to handle wind-driven rain, snowmelt, and the daily expansion of the membrane.
Multifamily and Apartment Building Roofing
Apartment and condo roofs in Boise sit directly over residents, so we plan tear-offs and recovers around occupancy, parking, and noise while keeping units dry through every phase.
Church and Religious Building Roofing
Sanctuaries and fellowship halls often combine steep visible slopes with hidden low-slope sections, so roof planning for Boise congregations balances appearance, tight volunteer budgets, and watertight detailing around steeples and valleys.
EPDM Commercial Roofing
EPDM's rubber membrane handles Boise's wide temperature swings and UV well, and we focus installation and repair on the seams and flashings, where this system succeeds or fails over decades.
Energy-Efficient Cool Roof Installation
Reflective cool-roof systems cut the heat a Boise building absorbs during long, sunny high-desert summers, and we weigh membrane color, insulation upgrades, and payback against current energy costs.
Standing Seam Metal Roofing
Standing-seam metal sheds Boise's snow and rain with concealed fasteners and long panel runs, and we detail expansion, clip spacing, and penetrations so the roof handles real thermal movement.
Retail and Shopping Center Roofing
Retail and shopping-center roofs in Boise cover many tenants under one large membrane, so we map leaks to the right storefront and plan maintenance that never blocks a sales floor.
Auto Dealership Roofing
Dealership roofs over showrooms, service bays, and parts storage in Boise carry heavy rooftop HVAC and exhaust, so we scope curb flashing, drainage, and a work plan that never closes the sales floor.
Insurance Claim Coordination
Storm and hail claims on Boise commercial roofs move faster with clear documentation, so we photograph damage, scope repairs, and speak the adjuster's language to keep an owner's claim grounded in evidence.
Built-Up Roofing
Boise still has plenty of gravel-surfaced built-up roofs, and we assess blistering, alligatoring, and embedded moisture to decide whether a BUR roof is worth maintaining or has reached replacement.
Restaurant and Food Service Building Roofing
Restaurant roofs in Boise battle grease-laden kitchen exhaust that degrades ordinary membranes, so we specify grease-resistant systems and detail the area around hoods and curbs with extra care.
Self-Storage Facility Roofing
Self-storage roofs in Boise protect tenants' belongings across long, low-slope runs and metal canopies, so we focus on drainage, panel seams, and flashing that keep units bone-dry.
KEE Single-Ply Roofing
KEE single-ply membranes resist chemicals and stay flexible in Boise's temperature swings, making them a strong fit for restaurants, plants, and any roof exposed to grease or industrial exhaust.
School and K-12 Educational Building Roofing
K-12 roofs in Boise are best replaced over summer break, so we scope the work to finish before classes return while protecting the building from the valley's late-summer storms.
TPO Single-Ply Roofing
Industrial roofs around Boise face process exhaust, rooftop equipment, and big drainage demands, so we specify durable single-ply or coated systems and detail every curb and penetration against hard use.
PVC Roofing
PVC membrane's welded seams and grease resistance suit Boise restaurants and industrial buildings, and we hot-air-weld and probe every seam so the roof's strongest detail is also its most tested one.
Healthcare Facility Roofing
Hospitals and clinics in Boise can't tolerate a roof leak over sterile or patient areas, so we plan work around infection-control barriers, continuous operation, and the sensitive equipment on and below the roof.
Warehouse and Distribution Center Roofing
Warehouse and distribution roofs in the Treasure Valley cover acres of low-slope membrane, so we concentrate on drainage over long spans, uplift resistance, and catching leaks before they reach stored goods.